diff --git a/help/boot.log b/help/boot.log
new file mode 100644
index 0000000..8bbf39b
--- /dev/null
+++ b/help/boot.log
@@ -0,0 +1,247 @@
+Terminal ready
+[50]HELLO! BOOT0 is starting!
+[53]BOOT0 commit : 749c1f9a-dirty
+[57]set pll start
+[59]periph0 has been enabled
+[62]set pll end
+[64][pmu]: bus read error
+[66][pmu]: bus read error
+[69]PMU: AXP2202
+[77]vaild para:8  select dram para0
+[81]board init ok
+[83]rtc[2] value = 0xf
+[85]DRAM BOOT DRIVE INFO: V0.651
+[88]the chip id is 0x6c00
+[91]chip id check OK
+[93]DRAM_VCC set to 1100 mv
+[96][DST] Dram DST Loop1
+[232][DST] Lclk,0x00008888,Memtest Pass
+[236][DST] Clk =672 MHz
+[238][DST] R_2d
+[247]read_calibration error
+[256]read_calibration error
+[266]read_calibration error
+[276]read_calibration error
+[286]read_calibration error
+[295]read_calibration error
+[305]read_calibration error
+[315]read_calibration error
+[324]read_calibration error
+[334]read_calibration error
+[337]retraining final error
+[1513][DST] R_2d_hv_D2:0x1c-0x64,0x49(314mV),0
+[1518][DST] R_2d_hv_D2:0x38~0x48,0x40
+[1522][DST] R_2d tpr6 = 0x40808080
+[1532][DST] R_1st
+[1548][DST] DB0 R_1st:3,0~26,27,0x07
+[1566][DST] DB1 R_1st:3,0~26,27,0x07
+[1583][DST] DB2 R_1st:3,0~25,26,0x06
+[1600][DST] DB3 R_1st:3,0~25,26,0x06
+[1604][DST] R_1st Tpr12 = 0x06060707
+[1607][DST] W_2st
+[1660][DST] DB0 W_2st:0,26~49,24,0x25
+[1719][DST] DB1 W_2st:0,28~54,27,0x29
+[1778][DST] DB2 W_2st:0,28~54,27,0x29
+[1838][DST] DB3 W_2st:0,25~50,26,0x25
+[1842][DST] W_2st Tpr11 = 0x25292925
+[1845][DST] R_2st
+[1886][DST] DB0 R_2st:3,1~25,25,0x07
+[1927][DST] DB1 R_2st:3,1~25,25,0x07
+[1961][DST] DB2 R_2st:3,2~22,21,0x06
+[1995][DST] DB3 R_2st:3,0~23,24,0x05
+[1999][DST] R_2st Tpr12 = 0x05060707
+[2163][DST] RV_C, VW:0x3a-0x46, DW:120ps
+[2260][DST] Dram DST Success
+[2263]DRAM CLK =672 MHZ
+[2266]DRAM Type =8 (3:DDR3,4:DDR4,7:LPDDR3,8:LPDDR4)
+[2278]Actual DRAM SIZE =1024 M
+[2281]DRAM SIZE =1024 MBytes, para1 = 30fa, para2 = 4000000, dram_tpr13 = 2006c61
+[2294]DRAM simple test OK.
+[2297]rtc standby flag is 0x0, super standby flag is 0x0
+[2303]dram size =1024
+[2306]card no is 0
+[2307]sdcard 0 line count 4
+[2310][mmc]: mmc driver ver 2021-10-12 13:56
+[2315][mmc]: b mmc 0 bias 0
+[2323][mmc]: Wrong media type 0x0
+[2326][mmc]: ***Try SD card 0***
+[2336][mmc]: HSSDR52/SDR25 4 bit
+[2339][mmc]: 50000000 Hz
+[2341][mmc]: 59638 MB
+[2344][mmc]: ***SD/MMC 0 init OK!!!***
+[2454]Loading boot-pkg Succeed(index=0).
+[2458][mmc]: b mmc 0 bias 0
+[2461]Entry_name        = u-boot
+[2471]Entry_name        = monitor
+[2475]Entry_name        = dtbo
+[2478]Entry_name        = dtb
+[2482]Jump to second Boot.
+NOTICE:  BL3-1: v1.0(debug):f30a720
+NOTICE:  BL3-1: Built : 16:02:57, 2024-06-26
+NOTICE:  BL3-1 commit: 8
+NOTICE:  cpuidle init version V2.0
+ERROR:   tsp_ep_info->pc is NULL
+ERROR:   Error initializing runtime service tspd_fast
+NOTICE:  BL3-1: Preparing for EL3 exit to normal world
+NOTICE:  BL3-1: Next image address = 0x4a000000
+NOTICE:  BL3-1: Next image spsr = 0x1d3
+
+U-Boot 2018.05 (Feb 12 2025 - 10:50:44 +0800) Allwinner Technology
+
+[02.570]CPU:   Allwinner Family
+[02.573]Model: sun50iw9
+I2C:   ready
+[02.577]DRAM:  1 GiB
+[02.581]Relocation Offset is: 35ebb000
+[02.629]secure enable bit: 0
+[02.632]pmu_axp152_probe pmic_bus_read fail
+[02.635]pmu_axp1530_probe pmic_bus_read fail
+[02.640]PMU: AXP2202
+[02.643]BMU: AXP2202
+[02.645][AXP2202] comm status : 0x0 = 0x18, 0x1 = 0xd0
+[02.650][AXP2202] onoff status: 0x20 = 0x1, 0x21 = 0x1
+AXP2202_IIN_LIM:38
+AXP2202_IIN_LIM:38
+[02.660][axp][err]:
+b12_mode: 0
+AXP2202_IIN_LIM:38
+FDT ERROR:fdt_get_regulator_name:get property handle twi-supply error:FDT_ERR_INTERNAL
+[02.694]battery_check pass:radio:92, vol:4043
+[02.699]CPU=1008 MHz,PLL6=600 Mhz,AHB=200 Mhz, APB1=100Mhz  MBus=400Mhz
+[02.707]drv_disp_init
+[02.741]__clk_enable: clk is null.
+[02.747]drv_disp_init finish
+[02.750]gic: sec monitor mode
+[02.782]flash init start
+[02.784]workmode = 0,storage type = 1
+[02.788]MMC:     0
+[02.789][mmc]: mmc driver ver uboot2018:2021-07-19 14:09:00
+[02.795][mmc]: get sdc_type fail and use default host:tm1.
+[02.806][mmc]: Using default timing para
+[02.810][mmc]: SUNXI SDMMC Controller Version:0x40200
+[02.828][mmc]: card_caps:0x3000000a
+[02.831][mmc]: host_caps:0x3000003f
+[02.835]sunxi flash init ok
+[02.838]Loading Environment from SUNXI_FLASH... OK
+[02.855]out of usb burn from boot: not need burn key
+[02.859]boot_gui_init:start
+partno erro : can't find partition Reserve0
+[02.874]Get Reserve0 partition number fail!
+tcon_de_attach:de=0,tcon=0[02.885]boot_gui_init:finish
+[02.889]bmp_name=bootlogo.bmp
+partno erro : can't find partition bootloader
+--allen--PE_pull[31:0] = 0x0
+--allen--PE_pull[31:0] = 0x1000
+--allen--PE_data[31:0] = 0x40
+===lcd_panel_uboot_fj035fhd05_v1_init:L274,lcd_type = 0
+921654 bytes read in 322 ms (2.7 MiB/s)
+[03.234]get_boot_dram_update_flag 1
+[03.237]begin to update boot0 atfer ota
+[03.242]boot0 size:65536
+size 65536
+===allen==: download_normal_boot0 L288
+storage type = 1
+[03.259]sunxi_flash_mmc_download_spl: write back spl done
+[03.268]sunxi_flash_mmc_download_spl: write main spl done
+[03.273]update boot0 success
+[03.276]Item0 (Map) magic is bad
+[03.279]the secure storage item0 copy0 magic is bad
+[03.284]Item0 (Map) magic is bad
+[03.287]the secure storage item0 copy1 magic is bad
+[03.291]Item0 (Map) magic is bad
+[03.297]update dts
+partno erro : can't find partition private
+partno erro : can't find partition private
+partno erro : can't find partition private
+partno erro : can't find partition private
+partno erro : can't find partition private
+partno erro : can't find partition private
+partno erro : can't find partition private
+[03.374]update[03.378]LCD open finish
+ part info
+start detect rtc domain...
+rtc domain status: okay [0x90000000]
+[03.396]update bootcmd
+[03.398]No ethernet found.
+Hit any key to stop autoboot:  0
+Android's image name: sun50i_arm64
+[04.322]Starting kernel ...
+
+[04.325][mmc]: MMC Device 2 not found
+[04.328][mmc]: mmc 2 not find, so not exit
+[    0.000000] Booting Linux on physical CPU 0x0
+[    0.000000] Linux version 4.9.170 (flower@flower-B85M-D2V) (gcc version 5.3.1 20160412 (Linaro GCC 5.3-2016.05) ) #6 SMP PREEMPT Mon Dec 23 11:50:09 CST 2024
+[    0.000000] Boot CPU: AArch64 Processor [410fd034]
+[    0.000000] bootconsole [earlycon0] enabled
+[    0.000000] allen_boe_lcd=0, str=old
+[    0.081682] BOOTEVENT:        81.677332: ON
+[    0.591366] sunxi:i2c_sunxi@twi3[ERR]: get supply failed!
+[    0.591993] sunxi:i2c_sunxi@twi5[ERR]: get supply failed!
+[    0.600894] axp2101-regulator axp2101-regulator.0: Setting DCDC frequency for unsupported AXP variant
+[    0.600973] axp2101-regulator axp2101-regulator.0: Error setting dcdc frequency: -22
+[  [    0.977784] uart uart1: get regulator failed
+[    1.004404] [NAND][NE] Not found valid nand node on dts
+[    1.012243] sunxi-wlan soc@03000000:wlan: get gpio chip_en failed
+[    1.019149] sunxi-wlan soc@03000000:wlan: get gpio power_en failed
+[    1.116092] hci: request ohci0-controller gpio:272
+[    1.121803] hci: request ohci1-controller gpio:147
+[    1.341362] --[allen]-- sunxi_gpadc_probe: 321
+[    1.346562] ---[allen] sunxi_gpadc_probe: allen_gpadc_enable_flg=1
+[    1.363970] rtc-pcf8563 5-0051: low voltage detected, date/time is not reliable.
+[    1.375017] VE: get debugfs_mpp_root is NULL, please check mpp
+[    1.375017]
+[    1.383240] VE: sunxi ve debug register driver failed!
+[    1.383240]
+[    1.395249] axp2202_usb_power: axp2202-acin device is not configed, not use vbus-det
+[    1.395249]
+[    2.685726] mmc:failed to get gpios
+[    2.764876] sunxi-mmc sdc1: smc 2 p1 err, cmd 52, RTO !!
+[    2.771684] sunxi-mmc sdc1: smc 2 p1 err, cmd 52, RTO !!
+[    2.782118] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !!
+[    2.788873] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !!
+[    2.795620] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !!
+[    2.802312] sunxi-mmc sdc1: smc 2 p1 err, cmd 5, RTO !!
+[    2.815338] ERROR: pinctrl_get for HDMI2.0 DDC fail
+[    2.838609] cpu cpu1: opp_list_debug_create_link: Failed to create link
+[    2.846089] cpu cpu1: _add_opp_dev: Failed to register opp debugfs (-12)
+[    2.853657] cpu cpu2: opp_list_debug_create_link: Failed to create link
+[    2.861142] cpu cpu2: _add_opp_dev: Failed to register opp debugfs (-12)
+[    2.868729] cpu cpu3: opp_list_debug_create_link: Failed to create link
+[    2.876248] cpu cpu3: _add_opp_dev: Failed to register opp debugfs (-12)
+[    2.942395] rtc-pcf8563 5-0051: low voltage detected, date/time is not reliable.
+[    2.950691] rtc-pcf8563 5-0051: hctosys: unable to read the hardware clock
+[    2.959892] [sound  402][CODEC-HDMI sunxi_codec_dev_probe] register codec-hdmi success
+[    2.969655] [asoc_simple_probe, 432]
+[    2.975136] [asoc_simple_probe, 432]
+[    2.979798] [asoc_simple_probe, 432]
+[    2.983892] [asoc_simple_probe, 432]
+[    2.989213] [asoc_simple_probe, 432]
+[/init]: getty is ttyS0
+[/init]: RootDevice is "/dev/mmcblk0p5" , GPT_SUPPORT=1
+[/init]: Try to load EMMC ...
+e2fsck 1.42.12 (29-Aug-2014)
+/dev/mmcblk0p5 has unsupported feature(s): metadata_csum
+e2fsck: Get a newer version of e2fsck!
+[    3.574812] cgroup: cgroup2: unknown option "nsdelegate,memory_recursiveprot"
+[    3.583324] cgroup: cgroup2: unknown option "nsdelegate"
+[    4.456820] [asoc_simple_probe, 432]
+[FAILED] Failed to start Set Up Additional Binary Formats.
+[    5.245291] proc: unrecognized mount option "hidepid=invisible" or missing value
+[    5.640199] rtc-pcf8563 5-0051: low voltage detected, date/time is not reliable.
+[    7.295453] proc: unrecognized mount option "hidepid=invisible" or missing value
+[    7.694853] sunxi-mmc sdc1: smc 2 p1 err, cmd 52, RTO !!
+[    7.701695] sunxi-mmc sdc1: smc 2 p1 err, cmd 52, RTO !!
+[    8.479656] [asoc_simple_probe, 432]
+[    8.517414] [asoc_simple_probe, 432]
+[   10.709810] rtc-pcf8563 5-0051: low voltage detected, date/time is not reliable.
+
+Ubuntu 22.04 LTS ANBERNIC ttyS0
+
+ANBERNIC login: [   13.535341] Bluetooth: Non-link packet received in non-active state
+[FAILED] Failed unmounting /mnt/vendor.
+[  216.433477] [VIN_WARN]video1 device have been closed!
+[  216.439207] [VIN_WARN]video0 device have been closed!
+[  217.344201] sunxi_ohci_hcd_shutdown, ohci0-controller is disable, need not shutdown
+[  217.352774] sunxi_ehci_hcd_shutdown, ehci0-controller is disable, need not shutdown
+[  217.361563] reboot: Power down
+PANIC in E